Видео

There was a lot of oxidized and failed clear coat that needed to be removed.

I added AT-205 to my 76 VW Bus camper. I''ve had it at 3 top classic car mechanics and they all say it's in great condition accept for the slight oil leak. Well, It's defiantly leaking a quarter size drip a day. So I put in the 205. 5 hundred miles later it's still leaking. Can I ADD more 205?. Will it be bad for the engine to add more ?. No one says that it's a major issue but the Bus still leaks with the 205. What should I do now?. Is another bottle going to hurt the engine. ? Reply

I changed my Rear brake pads without putting it in Brake maintenance mode. Now error keeps parking brake errors keeps popping up. How can I reset it?

Tried another brand first ran it for a month did nothing to stop my rear main seal from leaking , changed my oil and filter put AT-205 in and an hour later leak has practically stopped 👍

Can’t get it in DE or PA

I've been planning on getting a lift for a couple of years and after reading all I could, I would stick with Advantage lifts. Vastly superior materials quality and safety design. A but more than these, but you get your money's worth!

vert nice👍

The interview was a great movie

@JohnEngel how did it hold up after one year? Still looks crystal clean?

Oooooooh. She looks so purty there.

Great video. Crazy how prices have changed in a few years. I paid 21k for my 20x50 with 14’ walls a 16w 14h front door and a 8x8 back door. You definitely got a better price. I wish I had the room for 30wide like yours

Thanks for this video. I've been trying to take care of my late mother's car. I recently cleaned the windshield and realized that a good chunk of what I thought was dirt and streaks were actually scratches from the wiperblades that I replaced a while back, so now I'm looking into polishing. Thanks to you, I know what I need to do now.

Helpful video. Thanks!

Thank you so much for this video!!!! I just tried it and it worked beautifully 😍😍😍 got rid of all the oxidation from my lights. I was gonna pay someone to do it for me but now I don’t need to thank you bro ❤

It worked on my 2017 VW Golf TSI with leaking Transmission oil cooler. I just mixed it to the transmission oil and worked like it should, zero leak and AT-205 save my time and money replacing hard to reach parts.

I've used it for years. The key is you have to flow the directions exactly. Then you have to make sure you don't do extended oil changes. Do them every 3.5-4k instead of 5k. If it doesn't stop the leak then it's not the rear main seal and a gasket seal oil doesn't have much contact with that likely has harden. That little.bottle has saved me $1500 just to.replace a $10 part. 😂

Thanks to your Videos, just did to my 2004 rav4. Mine was not to yellow. Just the compound did the job already. Your video was year ago. How long does it last?

Tried it. Didn't work.

Can you rent the compression tool for squeezing hydraulic pads for re-asserting over the brake pads? Or can a c-clamp be utilized as long as careful not to gouge pads?

Jeez make a longer intro

Hello sir after concrete flooring How can I apply epoxy ? Can you please tell me how to use epoxy effectively ?

That viper has always been my dream car.... awesome 👌

Thanks! I going to remove my old decals from my 87’ b2200.

Shouldn't you drain some oil, or better replace the oil, first before putting in the additive?

It's actually the best place for a battery.

John, I recently purchased a 2007 Boxster S 987. What was the name of the install video you watched on the Boxster install? I can't seem to find it. Thanks

Great Video! I am looking to bypass the bose setup, and fairly good with electrical work. Can you tell me, is the standard harness plug & the spiral bose plug into the loom the same? I will end up running new stereo outs, so hoping that I can just use the standard plug, for power etc and save cutting the factory harness Searched most of the internet and cannot find anyone who has held both - you are my unicorn! Again love the video, and appreciate any help

you dont say how to reset oil change warning??

Price increase since 2019, = 50%

Who’s is that?

Great video, clearly explained.

Oooooh man... That is a sexy sneak peek!

308or 338

308?

In SoCal they want 14,000 for a 30x40, same doorings, 4", #3 rebar though on 24" centers.

If you believe any of these leak-fix additives really work, I got a bridge.... Come on people.

My major major concern with doing something like this on the windsheild is getting distortion once the scratch is gone. Did you notice any distortion in the glass afterwards even in the slightest bit? A shimmering of light over the area at night? Modern day glass is thinner than it used to be.

Hey man thank-you I've been dealing my own for months and most of em are bubbled lol but this really really helped

I have to imagine that you need more than soap and water to prep an older garage that already has various stains and oil on it.

My light diesel engines oil cooler is leaking small amounts of engine oil into my engines water galleries when i rev the engine hard. Do you think this will help the o rings in the oil cooler swell enough to stop the leak?

I don't know without reading all the comments, not doing that. Not how wheels should be torqued. I bet someone already said it. Star pattern. Old school les schwab tires guy here.

Thanks for taking the time to produce& and share this vid', and 'real world' findings 🙂 Acquired 4 units of it. Will be using single unit(s) on the '82 Ford F100 V6 3.8L M30T & the '96 GMC Sierra V8 K1500 . Btw, 6 u.s. quarts = 5.68 litres ;-)

Could you tell me if the control arm fitting has any adjustment? I see you can adjust pushrods but i dont want to loose ground speed however steering is really stiff and like to adjust if possible. Wonder if the gas struts are adjustable? Service manual no info. Also on the spring built on control arm fitting i think one is coming loose but again see no info anywhere to confirm what this does..

I’m in

I’m in

ÕMĞ é PôWéŘ-PhÛľĽ Orrrsé-Strâylêan

Since the foam is combustible, I would not leave leave the walls and ceiling uncovered. In most places covering combustible insulation is a building code requirement. And, if a fire occurs insurance will not cover it.

Hi John, how many total screws did you remove to take out the under cover? Thank you. Martinellis

These oil additives are basically a one time deal, if they dont work the first time adding mor is just a waste. Time to break down and replace whatever seal has failed.

The areas of the hood that are white and flaky is the failed clearcoat. If you want it to look good you need to sand off the white flaky stuff and get down to the color coat (basecoat). When clearcoat fails it delaminates from the basecoat and makes that hazy, rough, flaky looking mess. Once you get past the clearcoat it will be a different color tone and dull. Then the product you used will look much better applied over the affected area.